52' Lagoon 2015

The Lagoon 52 marks a whole new era in the design of cruisingcatamarans, as indeed did its predecessor, the famed Lagoon 500. With itsdiamond-shaped vertical bows, bevelled hulls, its as if levitated deckhouseand tall rig, the Lagoon 52 is no ordinary catamaran, but its originalitygoes a great deal further than just its "outer" appearance, or even itsinterior layout.

Manufacturer Provided Description

The Lagoon 52, the latest model developed by the world's leading builder of cruising catamarans, marks a whole new era in the design of such boats, as indeed did its predecessor, the famed Lagoon 500. With its diamond-shaped vertical bows, bevelled hulls, its as if levitated deckhouse and tall rig, the Lagoon 52 is no ordinary catamaran, but its originality goes a great deal further than just its "outer" appearance, or even its interior layout. This new Lagoon is the result of lengthy discussions between the architects at Van Peteghem-Lauriot Prévost (VPLP), the Italian Nauta Design agency and the Lagoon design department. These discussions led us to make some important and sometimes radical choices, while remaining faithful to what we believe in, in terms of elegance, comfort, safety, user friendliness and, it goes without saying, performance under sail. 

Construction

• Materials used: infusion of polyester resin and high quality anti-osmosis resin on a balsa wood frame and fibre glass skin. Hull bottom and keel in infused monolithic laminate.
• Structural partitions (sandwich balsa) par infusion.
• Bilge painted light grey.
• Hull finished with white gel coat.
• Bridge in white gel coat with non-slip diamond plate.

Deck

• 11 mooring cleats
• Harken deck gear.
• 1 x 50 mainsail halyard electric winch to bow of helm: mainsail halyard and reefing lines.
• 3 x 50 manual winches: 2 for Genoa lines and 1 for halyard and reefer lines
• Running rigging:
• 1 double purchase spectra mainsail halyard
• 1 spectra Genoa halyard with tension adjustment track at mast base
• 1 boom topping lift
• 3 reefing lines
• Genoa sheets
• Mainsail sheet led back to winches via boom
• Main traveller adjustment next to port side winches
• Manual jib furler
• Bow pulpits with wooden seats
• 610mm stanchions, 2 lifelines
• PVC toerail

Cockpit

• Large cockpit in salon, protected by rigid bimini with spotlights.
• Cockpit level with galley.
• Anti-skid flooring (teak available)
• “U” shaped bench to starboard. 1 gas storage unit in base.
• Removable cockpit table, interchangeable with inside table.
• Table storage unit in ceiling.
• Storage along starboard side of cockpit: 1 flap with access to external bin + storage
• Optional ice maker in cabinet.
• Storage along port side of cockpit: 1 sink + mixer tap + grey resin countertop under flap, and two door storage unit (optional 80L cockpit fridge).
• Pass-through to inside via sliding window
• Access to flybridge via port side cockpit.
• Access to port stern cabin from cockpit.
• Cabin closed with gull-wing door on jacks.
• 1 Lazy boy with storage unit in base.
• 2 cockpit lighting areas.

Accommodations

Salon

• Large main salon with panoramic view - standing headroom approx: 2,05 m / 6’9”
• Steel pillar with fabric cover
• Varnished coffee table that can be swapped with the large cockpit table
• Seating for 5 / 6 people
• Storage compartments under bench seats
• Locking aluminium sliding cockpit door with open/closed positions
• 2 opening hatches on forward windows
• Curtains on forward salon windows

Starboard bow cabin

• Access via galley through hatch in starboard bow.
• Cabin closed with standard door.
• 1 double bed – 2.05m x 1.60m – with side access, bed with slats optional.
• Headboard with storage.
• 2 drawers under bed.
• Storage in outboard: wardrobe + shelving
• Shelving and 2 level bookcase. (TV optional)
• 1 fixed hull window in screen printed PMMA with porthole
• Privacy curtains (optional shutters)
• 1 round deck hatch with mosquito net and blind
• Direct access to bathroom via shower, with full length mirror on cabin side of door.
• Minimum headroom: 2.05m.
• 1 220V socket (Finishing pack)
• Upholstered panels on ceiling liners
• General cabin lighting with two way switch by bed and reading lamp in headboard.
• Indirect lighting under first shelf and cornice (by finishing)
• Two way switch in headboard and by cabin doorway

Bathroom in starboard bow cabin

• Bathroom accessed through cabin.
• Solid resin countertop (white).
• Mixer tap.
• Anti-skid composite flooring (Teak flooring with black joints available)
• 2 door upper cabinet with mirrors above sink.
• Large manual fresh water toilet in every WC.
• Toilet paper holder
• Headroom: 2.05m.
• Plexiglas shower door.
• Composite shower duckboard with drainage. (Teak slats available)
• Storage in shower block.
• Deck hatch with mosquito net and blind.
• 3 spotlights

Starboard stern cabin: owner

• Access via galley through starboard hatch.
• Separate toilet
• Large manual fresh water toilet in WC.
• 3 door storage intoilet.
• Sewage tank in passageway
• Toilet paper holder
• 1 deck hatch
• Desk with flap and pouffe as standard.
• Shelf at desk along outboard side on the whole cabin length.
• Upholstery above shelf along entire gunwale.
• 2 level bookcase
• 1 fixed hull window in screen printed PMMA with porthole
• Privacy curtains (optional shutters)
• Full length cabinet inboard opposite WC.
• Double wardrobe + 1 shelving unit.
• Large low cabinet with three drawers
• Eye level storage with flaps.
• 1 double bed across hull (2.05m x 1.60m) with side access, bed with slats optional.
• 2 x 2 drawers under bed (left and right)
• Headboard with storage.
• 2 round deck hatch with mosquito net and blind
• Open bulkhead for direct access to bathroom
• Minimum headroom: 2.05m.
• 1 220V socket in desk + 2 sockets in headboard to port and starboard.
• Upholstered panels on ceiling liners
• General cabin lighting with two way switch by bed and reading lamp in headboard.
• Indirect lighting under first shelf and cornice (by finishing)
• Two way switch in headboard and by cabin doorway

Galley

• Vast panoramic galley - headroom: 2.15m
• Upholstered steel posts
• Varnished high dining table interchangeable with small cockpit table
• Aluminium sliding door with lock provides access to cockpit, can be locked open or closed
• 4 under-floor boxes in middle of boat with hatches on hinges and jacks.
• 4 panels open on to front windows, open inwards.
• Wooden gunwale with storage on port side
• Curtains to side and front of coachroof
• 1 entrance per hull.

Engine

• Access to engine compartment from transoms via panels with stainless steel jacks.
• 2 YANMAR Sail drive 54hp Diesel
• Engine controls and control panels at helm on flybridge
• 2 propellers: 3 blades 18x14 LH
• Hold ventilation: Natural aeration and forced extraction in rear section
• 1 220V socket per engine compartment
• 1 light in each engine compartment.
• Engine compartment soundproofing: foam on engine partitions.

Electrical

• LED lighting throughout boat
• Wireless lighting, centrally controlled from touch screen on map table.
• 12V circuit including:
• 1 4’3” touch screen controls: lighting, battery level, fuel gages, water, navigation lights
• Available according to finish and options (Generator, AC): AC source management.
• 1 set of 12V 6x140Ah service batteries
• 1 12V 80Ah alternator.
• 1 12V 48Ah gel cell starter battery

Flybridge

• Access via stairway on port side of cockpit and directly from the starboard or port side of bridge.
• 1 helm with:
• 1100mm diameter wheel.
• Central console with handrail, electronic receiver (optional), electronic engine controls, windlass control (optional), and light switches.
• Engine panel on port side
• All lines led to forward section of flybridge around 3 winches.
• 3 Line storage boxes.
• Glass holder + storage tray on port side
• Seat on starboard side with storage.
• Sun bathing area to rear of flybridge (upholstery available)
• Helmsman base cushion as standard
• 2 flush deck hatches that can be used as scoops near cockpit
• 1 mainsail winch to rear of flybridge.

Sails

•  Fully-battened mainsail: 101 m² in double ply Dacron from Dimension Polyant with 3 reefing lines
• Self-tacking jib on manual furler: 59 m² in double ply Dacron from Dimension Polyant with antiUV strip

Mast/Rigging

• Anodised aluminium mast and boom with track and traveller.
• Double spreader rig
• 2 shrouds with chafe guards
• 2 lower shrouds with chafe guards
• 1 forestay with manual furler.
• Anodised aluminium boom
• Anodised aluminium transversal crossbeam
• Adjustable Lazy Jacks with spreaders
• Composite longitudinal beam

DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.